Assembly of ϵ-Keggin Polyoxometalate from Molecular Crystal to Zeolitic Octahedral Metal Oxide

Zeolitic octahedral metal oxides are inorganic crystalline microporous materials with adsorption and redox properties. New ϵ-Keggin nickel molybdate–based zeolitic octahedral metal oxides have been synthesized. ³¹P NMR spectroscopy shows that reduction of Mo^VI-based molybdates forms an ϵ-Keggin polyoxometalate that immediately transfers to the solid phase. Investigation of the formation process indicates that a low Ni concentration, insoluble reducing agent, and long synthesis time are the critical factors for obtaining the zeolite octahedral metal oxides rather than the ϵ-Keggin polyoxometalate molecule. The synthesized zeolitic nickel molybdate with Na⁺ is used as the adsorbent, which effectively separates C₂ hydrocarbon mixtures.     

Determination of lanthanum and cerium in cmsx-4 nickel-based superalloys by inductively coupled plasma mass spectrometryEI北大核心CSCD

CMSX-4 is the second-generation nickel-based single crystal superalloy used widely in the world. The oxidation resistance and corrosion resistance of CMSX-4 alloy can be improved by adding trace lanthanum (La), cerium (Ce) and other rare earth elements. A method for the simultaneous determination of La and Ce in CMSX-4 nickel-based superalloy by wet dissolution-inductively coupled plasma mass spectrometry was established. The sample was heated and dissolved under normal pressure by aqua regia and hydrofluoric acid, and the interference of fluorine ion was eliminated by using perchloric acid. The amount of dissolved acid and the digestion conditions were optimized. The limits of detection were 0.23 μg/g for La and 0.85 μg/g for Ce under optimized conditions. The spiked recoveries were 95.0%–98.9% with the relative standard deviations of 1.3%–3.9%, which can meet the requirements of accurate and rapid determination of La and Ce in CMSX-4 nickel-based superalloy. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

pH值对Bi_2MoO_6晶体形貌和可见光催化性能的影响

以(NH4)6Mo7O24·4H2O和Bi(NO3)3·5H2O为原料,采用普通水热法制备Bi2Mo O6光催化剂,研究p H值对制备该光催化剂的影响。对所制备的系列样品,采用X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、比表面积分析仪、X射线光电子能谱仪(XPS)和紫外-可见漫反射(UV-Vis DRS)进行表征。结果表明:p H值对Bi2Mo O6晶体的物相组成、形貌和光催化性能均有显著影响。p H值为1~7时,所制备的样品为纯相Bi2Mo O6,p H值为9或11时,出现第二相Bi3.64Mo0.36O6.55;随着p H值的升高,形貌依次为纳米棒、纳米片和无规则纳米颗粒。在可见光(λ≥420 nm)照射下,通过光催化降解罗丹明B(Rhodamine B,Rh B),探讨了制备Bi2Mo O6的p H值对其可见光催化活性的影响。当p H=7时,制备的样品光催化效果最好,光照50 min后对初始浓度为5 mg·L-1的罗丹明B溶液的降解率为85%。     

Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

Degradation of parathion methyl by reactive sorption on the cerium oxide surface: The effect of solvent on the degradation efficiency

A simple and easily scalable “wet” procedure was used to prepare nanocrystalline cerium oxide capable of destroying the toxic organophosphate pesticide parathion methyl. The synthetic procedure consists of the direct precipitation of cerous salt with aqueous ammonia in the absence of CO₂. The prepared cerium oxide was able to decompose the organophosphate compounds both in nonpolar (e.g., heptane) and polar aprotic (e.g., acetonitrile) solvents. However, in solvents with hydrogen-bond donating ability, the –OH groups on the cerium oxide surface were solvated and inactivated. The preferential solvation model was used to express the experimental dependencies of the cerium oxide degradation efficiency on the composition of the water-acetonitrile mixture. In certain solvent systems, some empirical polarity scales, such as the alpha-scale or the Dimrodth-Richardt parameter ET(30), may be correlated with the degradation efficiency of cerium oxide.     

SrMoO_4∶Sm~(3+),Na~+红色荧光粉的形貌调控和发光性能

以Sm~(3+)为激活剂,Na~+为电荷补偿剂,柠檬酸为配位剂,乙二醇作为辅助配位剂,采用溶胶-凝胶法合成前驱体,然后在800℃下焙烧,成功制备了一系列SrMoO_4∶Sm~(3+),Na~+红色荧光粉。用X射线衍射仪、扫描电镜、荧光光谱和傅里叶变换红外光谱等手段对样品的物相、形貌、组成、发光性能和量子效率等进行测试和表征。分析结果表明:制备的SrMoO_4∶Sm~(3+),Na~+荧光粉均为四方晶系结构,掺杂离子的加入对基质晶体结构影响不大。在403 nm近紫外光激发下,产物有4个发射峰,分别位于563、600、647和707 nm处,归属于~5G_(5/2)→~6HJ(J=5/2,7/2,9/2,11/2)的电子跃迁,其中位于647 nm处的主发射峰的相对发光强度最大。当Sm~(3+)的掺杂物质的量分数为1%~3%时,发光强度最好,当浓度超过1%~3%时,会发生荧光猝灭。对实验数据进行分析,确定荧光猝灭机理是由于钐离子间交换作用引起的,并计算了能量传递的临界距离为1.77~2.56 nm。此外,还详细研究了乙二醇对SrMoO_4∶Sm~(3+),Na~+荧光粉形貌的影响,研究结果表明:乙二醇加入量为5 m L时,产物形貌均匀,呈球形或椭球形;且分散性较好;荧光强度最大。     

基于钼酸盐光度法测定总磷的浊度去除方法

采取新的浊度去除方法,改进了测定总磷的钼酸盐光度法。测定过程中,消解液的浊度会对测定结果产生干扰。通过比较机械过滤法和试剂补偿法的浊度校正效果,建立了中速定性滤纸单次机械过滤的浊度去除方法,确定了最佳去除条件:控制待滤液温度不高于30℃,清洗纯水的体积不少于20 m L。选择消解液具有浊度干扰项的6种代表性水样,分别进行平行测定和加标回收试验,方法检出限为0.008 mg/L,测定结果的相对标准偏差为2.8%~7.9%(n=6),加标回收率为92.0%~106%。该方法灵敏度、准确度高,精密度良好,与现行国标法相比,试剂消耗量少,分析效率高,能够满足多种水环境样品中总磷的测定要求。     

蒙脱石负载氧化铈纳米酶用于克罗恩肠炎治疗

通过水热法合成由临床用药蒙脱石(Montmorillonite, MMT)负载的高效纳米酶氧化铈(Cerium dioxide, CeO₂), 通过开展体内外实验, 拓展其在炎症性肠病治疗中的普适性. 结果显示, CeO₂@MMT具有良好的类超氧化物歧化酶活性及类过氧化氢酶活性, 并且在小鼠克罗恩病的治疗中体现了明显的疗效及优异的生物安全性, 为CeO₂@MMT的应用拓宽了方向.     

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin in micellar solution and its analytical application to the determination of levofloxacin

Fluorescence resonance energy transfer between cerium ion(III) and levofloxacin is studied in a micellar solution of cetyltrimethyl ammonium bromide. A non-fluorescent 1:2 complex was formed between excited cerium ion(III) and ground state levofloxacin. The fluorescence of cerium ion(III) is quenched by levofloxacin with the quenching in accordance with the Stern–Volmer relation. The analytical relationship was established between the ratio of the fluorescence of levofloxacin present and absent cerium ion (III) and the concentration of levofloxacin, which helped to estimate the content of levofloxacin directly.     

Preliminary study on singlet oxygen production using CeF3:Tb3+@SiO2-PpIX

Luminescent properties and singlet oxygen production using CeF₃:Tb³⁺-based nanoparticles modified with SiO₂ and protoporphyrin IX (PpIX) were studied. CeF₃:Tb³⁺ nanopowder was prepared via sol–gel route, with subsequent surface coating by SiO₂ layer and the conjugation with photosensitive PpIX molecules. Radioluminescence spectra suggest an energy transfer from Ce³⁺ to Tb³⁺ ions and from Tb³⁺ to molecules of PpIX photosensitizer. The energy transfer was confirmed by photoluminescence decay curves. Singlet oxygen production was detected using a reaction of ¹O₂ with 3’-(p-aminophenyl) fluorescein (APF) chemical probe after X-Ray excitation. Qualitative changes in time resolved photoluminescence spectra in the region of 520 nm indicate ¹O₂ generation. Studied nanocomposites may be good candidates for the application in X-ray induced photodynamic therapy.